PRESSURE-SENSITIVE HOT MELT

Pressure Sensitive Hot Melt Adhesive Blocks

Select pressure-sensitive hot melt adhesive by substrate, coating method, application temperature, initial tack, holding power and end-use requirements.

Get Block Recommendation Compare Grades Request Sample →

Applications: Labeling / Hygiene / Sealing / Specialty coating
Application Temperature: Varies by grade
Key Selection Parameters: Initial tack / Holding power / Peel / Stability
Product Form: Pressure-sensitive blocks
Supply: Sample evaluation and bulk orders
Documents: Technical information available by grade

GRADE SELECTOR

Compare Grades by Production Requirement

Use the filters as a starting point, then confirm the choice with your actual substrate, equipment and production conditions.

Grade	Best For	Application Temp	Viscosity	Softening Point	Key Characteristic	Actions
3010Bottle Labeling Hot Melt Block	Beverage and daily-chemical bottle labels	160-180°C	2,500-5,000 cps @180°C	90±5°C	Strong initial tack and holding power for labels	View Grade Request Sample Request TDS
3011Nonwoven Hygiene Hot Melt Block	Nonwoven and elastic hygiene materials	160-180°C	1,300±500 cps @170°C	86±5°C	Low viscosity with a flexible adhesive layer	View Grade Request Sample Request TDS
3021Patch Material Hot Melt Block	Foot, therapy and patch material coating	150-160°C	5,000±700 cps @170°C	110±5°C	Flexible, adjustable peel behavior for patch systems	Request Sample Request TDS
3033Courier Bag Sealing Hot Melt Block	PE, OPP and composite courier-bag sealing	150-170°C	3,000-8,000 cps @160/170°C	85±10°C	Persistent tack for self-sealing bag closures	Request Sample Request TDS
3082Tire Sealant Repair Hot Melt Block	Tire repair and rubber sealing	Project-specific	13,000±2,000 cps @180°C	115±5°C	High viscosity for filling and rubber sealing	Request Sample Request TDS

GRADE 3010

3010 Bottle Labeling Hot Melt Block

Beverage and daily-chemical bottle labels

Application temp: 160-180°C
Viscosity: 2,500-5,000 cps @180°C
Softening point: 90±5°C
Color: Yellow or white transparent

Initial tack 5/5Holding power 5/5Stable melt flow

View Grade Request Sample Request TDS

GRADE 3011

3011 Nonwoven Hygiene Hot Melt Block

Nonwoven and elastic hygiene materials

Application temp: 160-180°C
Viscosity: 1,300±500 cps @170°C
Softening point: 86±5°C
Color: White transparent

Flow 5/5Flexible layerNonwoven compatibility

View Grade Request Sample Request TDS

GRADE 3021

3021 Patch Material Hot Melt Block

Foot, therapy and patch material coating

Application temp: 150-160°C
Viscosity: 5,000±700 cps @170°C
Softening point: 110±5°C
Color: White or yellow transparent

Controlled peelFlexible layerFormula adjustment

Request Sample Request TDS

GRADE 3033

3033 Courier Bag Sealing Hot Melt Block

PE, OPP and composite courier-bag sealing

Application temp: 150-170°C
Viscosity: 3,000-8,000 cps @160/170°C
Softening point: 85±10°C
Color: Yellow or white transparent

Initial tack 5/5Holding power 5/5Film compatibility

Request Sample Request TDS

GRADE 3082

3082 Tire Sealant Repair Hot Melt Block

Tire repair and rubber sealing

Application temp: Project-specific
Viscosity: 13,000±2,000 cps @180°C
Softening point: 115±5°C
Color: Black

Sealing 5/5Gap fillingRubber adhesion

Request Sample Request TDS

Performance ratings are relative comparisons within this product family and are not laboratory units or cross-category guarantees.

When Should You Consider a Pressure-Sensitive Hot Melt?

Pressure-sensitive hot melts are typically selected when the adhesive needs to retain tack after coating instead of setting immediately like a conventional packaging hot melt.

Initial tackHolding powerPeel behaviorCoating stabilityThermal stabilitySubstrate compatibility

Match a grade to your actual production line.

Share the substrate, equipment, temperature, speed and current bonding problem for a focused recommendation or sample evaluation.

Get Product Recommendation View Performance Testing