Nonwoven Compatibility
Fiber structure, basis weight, surface treatment and adhesive penetration vary by nonwoven. Trial the actual material to balance coverage with bleed-through control.
GRADE 3011
3011 Hot Melt Adhesive for Nonwoven and Hygiene Applications
3011 is a low-viscosity pressure-sensitive hot melt block for bonding nonwoven and elastic materials where coating adaptability, a flexible adhesive layer and holding performance are required.
- Grade
- 3011
- Product Form
- Pressure-sensitive block
- Best For
- Nonwoven and elastic hygiene materials
- Application Temp
- 160-180°C
- Viscosity
- 1,300±500 cps @170°C
- Softening Point
- 86±5°C
- Color
- White transparent
Technical Parameters and Application Fit
Application temperature
160-180°C
Viscosity
1,300±500 cps @170°C
Softening point
86±5°C
Color
White transparent
Elastic Materials
Elastic recovery creates continuous stress on the bond. Evaluate holding, creep and material distortion at the intended extension and adhesive amount.
Application Method
The 1,300±500 cps viscosity at 170°C supports evaluation for spray, roller or dot application. Equipment condition and coating pattern must be confirmed in production.
Flexible Adhesive Layer
Assess hand feel, hard spots and flex after cooling on the finished laminate rather than judging the molten adhesive alone.
Holding Performance
Test edge opening, creep and bond retention with the actual nonwoven, elastic and storage conditions.
Sample Testing
Compare coating stability, penetration, bond coverage, flexibility and holding on production materials before commercial adoption.
Final suitability should be evaluated with the customer's actual materials, production process and applicable end-product requirements.
Related Evaluation Resources
Grade 3011 FAQ
Is 3011 automatically suitable for every hygiene end product?
No. Materials, construction, process and regulatory requirements vary. Final suitability must be confirmed for the intended finished product.
What is needed for a useful sample trial?
Provide the nonwoven and elastic materials, coating method, temperature, speed, adhesive amount and target holding or flexibility requirements.
Request Grade 3011 for Your Materials
Send the substrate, equipment and production conditions so the sample can be evaluated against your actual process.